IPTV speed test: which quality can your connection carry?
Press the button. The test measures latency first, then about 8 seconds of download and 6 seconds of upload. The result tells you which of SD, HD, Full HD and 4K the measured speed supports. No sign-up, nothing to install.
Ready to measure
- Ping
- —ms
- Jitter
- —ms
- Download
- —Mbit/s
- Upload
- —Mbit/s
This test measures the connection between your device and this site's server (Frankfurt), not the streaming servers. Wi-Fi and a cable can give noticeably different numbers; repeat the test on the device you will watch on, in the evening.
How much speed does each quality need?
The figures are for one screen. If another TV or device in the house streams at the same time, add the requirements together.
| Quality | Download speed needed | Note |
|---|---|---|
| SD | 5 Mbit/s | Older channels and local broadcasts |
| HD | 10 Mbit/s | Most everyday watching |
| Full HD | 15-20 Mbit/s | The upper figure is comfortable for sport |
| 4K | 25 Mbit/s | A wired connection is advisable |
Upload speed
For IPTV the download speed is what counts. Upload matters for things like video calls; a line with fast download and slow upload is no problem for streaming.
If the number is lower than you expected
Most problems are solved inside the house. Work through these in order and measure again after each one.
- 01
Connect the device by cable
Plugging the TV or TV box into the router with an Ethernet cable removes the effect of walls and neighbouring networks. If a cable is not possible, move the device closer to the router.
- 02
Switch to the 5 GHz network
If your router broadcasts two networks, pick the 5 GHz one. 2.4 GHz reaches further but shares channels with the neighbours, and the speed fluctuates.
- 03
Turn off other load in the house
Background downloads, cloud backups and streams open on other screens share the same line. Measure again with them switched off.
- 04
Restart the router
Routers left on for days can slow down. Unplug it, wait 30 seconds and measure again.
- 05
If it stays low, show the result to your provider
If you measure far below the speed you pay for even on a cable with nothing else running, the line itself may be the problem. A few readings taken in the evening are the strongest evidence you can bring to your provider.
Questions about the speed test
Questions about the measurement on this page. For setup and playback problems, see the question bank.
Why does this test give a different result from my provider's test?
Providers' tests usually measure to the nearest server inside their own network. This test measures the whole path to our server in Frankfurt, with borders and other networks in between. Both results are right; they simply measure different paths.
How much data does the test use?
One measurement uses at most about 140 MB, and far less on slow lines because the time limit is reached first. Keep that in mind if you test on mobile data.
Should I run the test with my VPN switched on?
No. With a VPN on, traffic goes to the VPN server first and the number you see is the VPN's speed, not your line's. Switch it off to see the real picture; if you plan to watch through the VPN, take a second reading with it on.
What do ping and jitter mean?
Ping is the time data takes to reach the server and come back. Jitter is how much that time changes between consecutive readings. IPTV apps run with a buffer of a few seconds, so a high ping alone does not stop a stream; jitter is more telling: a high value means the connection flows unevenly, and that unevenness, not speed, is often what causes freezing.
Why is the result different every time?
Line usage changes minute by minute: other devices at home, load in the neighbourhood and the Wi-Fi signal all move the number. So do not rely on one reading; take three a few minutes apart and look at the lowest — the stream has to keep flowing at the worst moment too.
Guides on speed and freezing
How Much Internet Speed Does IPTV Need?
A steady 20 Mbit beats a fluctuating 100. The thresholds, and what to measure instead of speed.
IPTV Freezing and Buffering: The Fixes That Work
Six steps in order, from the one that fixes most cases to the one that needs us.
IPTV Wi-Fi vs Ethernet: Which Connection Streams Better?
Two connections with the same speed test result can behave very differently with live TV. Here is why, and how to compare them at home.
The measurement shows the path to our server; the way to see how the actual streams play for you is the 6-hour free trial (1 hour during match times).
See the free trialSend us the result and we will look at it together
Tell us the figure you measured and your device; we will tell you which quality will play comfortably and which plan fits.
Message us on WhatsApp