OTT Navigator Setup: Xtream Login, EPG and Catch-up Settings
·7 min read

OTT Navigator setup takes a few minutes on Android TV, TV boxes and phones: install the app from Google Play, choose Xtream login as the provider type and enter the server address, username and password. With Xtream, the programme guide and catch-up usually come through on their own. The real difference shows in a handful of settings you change afterwards.
The developer is SIA Scillarium Studio. Core features are free and some advanced ones unlock with a paid Premium version; its price and scope vary by region, so check the current details on the Google Play listing. Menu names shift slightly between versions; the paths below describe the general structure.
Which devices it runs on
| Device | Install | Note |
|---|---|---|
| Android TV and Google TV | Google Play | The remote-friendly interface is built for these |
| Android TV box | Google Play or APK | Uncertified boxes may lack Play |
| Amazon Fire TV (Fire OS) | APK via Downloader | Allow unknown apps in settings first |
| Android phone and tablet | Google Play | There's a touch interface too |
| Samsung, LG smart TVs | Not available | Doesn't run on non-Android TVs |
Amazon's newer Fire TV sticks running Vega OS, starting with the Fire TV Stick 4K Select, don't run Android apps, so OTT Navigator can't be installed on them even as an APK. If you're buying a Fire TV for this, check which operating system the model uses.
OTT Navigator setup, step by step
- 01Install the appSearch Google Play for "OTT Navigator IPTV", check the developer is Scillarium and install. On devices without Play, only take the APK from a trustworthy source.
- 02Add a providerOn first launch the app asks you to add a provider. Choose Xtream (login with username and password) rather than an M3U link.
- 03Enter your detailsType the server address including the port, then the username and password. Make sure the address starts with http:// and has no stray slash at the end.
- 04Wait for the list to loadThe app downloads the channel list, the film and series library and the guide. The first load of a large list can take a few minutes; don't close the app meanwhile.
- 05Choose which groups to showIn the provider settings, hide country and category groups you don't watch. A shorter list means faster zapping and faster guide loading.
If you have to use M3U
If your provider only gives an M3U link, choose the playlist type when adding the provider and paste the link. Films and series then arrive mixed in with the channels, and you may need to attach the guide separately. Pasting a long link from your phone, via a keyboard app or a phone remote app paired with the device, is far easier than typing it with the remote.
EPG source and time offset
With Xtream login the guide comes from the server and nothing else is needed. If you added an M3U link, or your provider gave you a separate XMLTV address, add it as a source in the EPG section of the provider settings.
If listings are an hour or two out, the cause is almost always the time zone, not missing data. Check the device's own time zone first (UK time, or CET for most of the EU, both with summer time). If the device is right, correct it with the time offset option in the EPG settings. Watching Turkish channels from abroad, the guide is converted to your device's clock, so a Turkish evening programme correctly shows two or three hours earlier in London.
Catch-up (archive) settings
Catch-up lets you pick a past programme from the guide and watch it, and it only works where the provider keeps an archive for that channel. Channels with an archive are usually marked with a small clock or rewind icon. With Xtream login the archive type is read from the server. If catch-up fails on an M3U list, look at the archive type option in the provider settings: the right value depends on the provider's server software, so ask your provider which one to choose.
Catch-up streams come from a different address than the live stream. If a live channel works but its archive won't open, the issue is not your device; that channel's archive simply isn't kept on the server.
Interface settings worth changing
| Setting | What it does | Suggestion |
|---|---|---|
| Decoder | Decodes video in hardware or software | Hardware first; software if the picture breaks up |
| Buffer size | How much of the stream loads ahead | Increase it for stutter; zapping gets slightly slower |
| Channel list view | List, grid or EPG grid | The EPG grid is easiest with a remote |
| Start screen | What the app shows at launch | Last channel or favourites |
| Channel numbers | Zapping by number | Turn on to change channel with the number keys |
A favourites list saves time too: rather than hunting through thousands of channels for the same ten every evening, make favourites the start screen and you're watching as soon as the app opens.
Common problems
- Login error: username and password are case-sensitive. A missing port number is the second most common cause.
- Picture but no sound: in the player settings, switch audio from passthrough to decoding on the device itself.
- Stutter at certain times: try a wired connection first, then increase the buffer.
- The app waits a long time at every launch: check how often the provider settings refresh the list and EPG; a full refresh on every launch is unnecessary.



